Domestic shortcomings of glue dispensers



1. The internal heat dissipation system of the glue dispenser is not very good.


2. The glue dispenser often crashes.


3. The glue filled LCD is anti black, and garbled code may appear.


4. The position deviation of the glue filling machine (which may occur after running for a period of time) is different from the actual workpiece.


5. The electrostatic treatment of glue injection is not ideal enough (there is a large amount of static electricity generated).


6. The three-axis operation speed of glue injection is relatively slow, which is different from the actual speed required by the manufacturer.


7. The use of a Table in conjunction with a small dispensing machine may take some time, and the Table's Relay may be broken down, resulting in leakage of the signal output.


8. The program of the CF card is not stable enough, and industrial computers often burn down.


9. The load bearing capacity of the machine is relatively weak.


10. The connection of the driver board connector is loose, which can easily lead to poor contact between the motherboard and the driver board.